Measuring the voltage of the Department of processor

[en.mohamedsaid]

Our topic today on how to measure the voltage of the Department of processor,

It is well known that the Department of processor, consisting of

* main contral
* ic driver
* mosfet
* capacitors
* chok or iron


We come to the process of measuring the voltage on the circuit

First is set to avometer metering mode as follows



Is then placed party avometer's ground (black) as follows

Turn motherboard

Here we must make sure that the 12-volt already Atx2
Meaning that the power supply is good
As follows



Will find reading on avometer like the following picture



This means the presence of 12-volt

Start here in the process of measuring up to make sure the work of the Service or not

Party is placed on the base of the red in the first MOSFET

You should read the 12-volt



* Important Note *
Can be confirmed by the arrival of the voltage processor
By measuring the voltage on chok or iron ا as follow



However, it value ranging between 1.3: 1.7 a in the following picture

[EN.AHMAD_RAEE]

thank you very much